Digital Timer
H5CX
CSM_H5CX_DS_E_3_1
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions
or comments. Refer to Safety Precautions (Common) on page 47.
DIN 48 × 48-mm Multifunction Digital Timer/2-stage Digital Timer
• Highly visible display with backlit negative transmissive LCD.
• Finger-safe terminals (screw terminal block models).
• Complies with IP66, NEMA4, and UL Type 4X (when using the Y92S-29 Waterproof Packing and Y92F-30 Flush Mounting Adapter).
H5CX Series
H5CX-A/-L
H5CX-B
1
2
2-stage Digital Timer
with 6-digit display
H5CX-B
Multifunction Digital Timer
with 4-digit display
H5CX-A (standard type)
H5CX-L (economy type)
Contents
Multifunction Digital Timer
H5CX-A/-L........................................................
2
2-stage Digital Timer
H5CX-B............................................................ 35
Common to All Models
Safety Precautions ........................................... 50
1
Multifunction Digital Timer
H5CX-A/-L
DIN 48 × 48-mm Multifunction Digital Timer
with a Bright, Easy-to-view, Negative
Transmissive LCD.
• Programmable PV color to visually alert when output status
changes (screw terminal block models).
• Intuitive setting enabled using DIP switch (H5CX-A/-A11 models) and ergonomic up/down digit keys.
• Twin timer in one body to meet a broader range of cyclic control
application requirements as well as ON/OFF duty adjustable
flicker mode.
• PNP/NPN switchable DC-voltage input (H5CX-A/-A11 models).
• Meet a variety of mounting requirements:
Screw terminal block models, and pin-style terminal models.
• Six-language instruction manual.
Contents
Model Number Structure .................................................................3
Ordering Information........................................................................3
Specifications ..................................................................................4
Connections.....................................................................................7
Nomenclature ..................................................................................11
Dimensions......................................................................................12
Operating Procedures .....................................................................17
Setting Procedure Guide...........................................................17
Operating Procedures (Timer Function)....................................18
Operating Procedures (Twin Timer Function)............................26
Operation in Timer/Twin Timer Selection Mode ........................31
Additional Information......................................................................32
2
H5CX-A/-L
Model Number Structure
■ Model Number Legend
H5CX-@@@@-@
1 2 3 4
5
3. Output type
None: Contact output
S:
Transistor output
4. Supply voltage
None: 100 to 240 VAC 50/60 Hz
D:
12 to 24 VDC/24 VAC 50/60 Hz
5. Case color
None: Black
G:
Light gray (Munsell 5Y7/1): Produced upon request.
1. Type classifier
A:
Standard type
L:
Economy type
2. External connection
None: Screw terminals
8:
8-pin socket
11: 11-pin socket
Ordering Information
■ List of Models
Output type
Supply voltage
Models
Standard type
Screw terminals
Contact output
100 to 240 VAC
Transistor output
12 to 24 VDC/24 VAC
Economy type
11-pin socket
8-pin socket
H5CX-A
H5CX-A11
H5CX-L8
12 to 24 VDC/24 VAC
H5CX-AD
H5CX-A11D
H5CX-L8D
100 to 240 VAC
H5CX-AS
H5CX-A11S
H5CX-L8S
H5CX-ASD
H5CX-A11SD
H5CX-L8SD
Note: Depending on the wiring, unwanted current from the AC power supply may occasionally burn out internal parts. H5CX-A/-L (except for H5CXA11/-A11S) models do not have a transformer. Therefore, the power supply and input circuit are not insulated. Refer to Safety Precautions
(H5CX-A/-L) on page 49 for wiring details. The power supply and input circuit for H5CX-A11/-A11S models have basic insulation.
■ Accessories (Order Separately)
Name
Flush Mounting Adapter (See note 1.)
Models
Y92F-30
Waterproof Packing (See note 1.)
Y92S-29
Track Mounting/
Front Connecting Socket
P2CF-08
Back Connecting Socket
8-pin
8-pin, finger-safe type
P2CF-08-E
11-pin
P2CF-11
11-pin, finger-safe type
P2CF-11-E
8-pin
P3G-08
8-pin, finger-safe type
P3G-08 with Y92A-48G (See note 2.)
11-pin
P3GA-11
11-pin, finger-safe type
Hard Cover
Soft Cover
Mounting Track
P3GA-11 with Y92A-48G (See note 2.)
Y92A-48
Y92A-48F1
50 cm (l) × 7.3 mm (t)
PFP-50N
1 m (l) × 7.3 mm (t)
PFP-100N
1 m (l) × 16 mm (t)
PFP-100N2
End Plate
PFP-M
Spacer
PFP-S
Note 1. Supplied with H5CX-A@ models (except for H5CX-A11@ and H5CX-L8@ models).
2. Y92A-48G is a finger-safe terminal cover attached to the P3G-08 or P3GA-11 Socket.
3
H5CX-A/-L
Specifications
■ Ratings
Item
Classification
H5CX-A@
H5CX-A11@
H5CX-L8@
Digital timer
Rated supply voltage
100 to 240 VAC (50/60 Hz), 24 VAC (50/60 Hz)/12 to 24 VDC (permissible ripple: 20% (p-p) max.)
Operating voltage range
85% to 110% rated supply voltage (12 to 24 VDC: 90% to 110%)
Power consumption
(See note 1.)
Approx. 6.2 VA at 264 VAC
Approx. 5.1 VA at 26.4 VAC
Approx. 2.4 W at 12 VDC
Mounting method
Flush mounting
Flush mounting, surface mounting, DIN track mounting
External connections
Screw terminals
11-pin socket
Terminal screw tightening
torque
0.5 N·m max.
---
Display
(See note 2.)
7-segment, negative transmissive LCD;
Present value:
11.5-mm-high characters,
red or green (programmable)
Set value: 6-mm-high characters, green
7-segment, negative transmissive LCD
Present value:
11.5-mm-high characters, red
Digits
4 digits
Time ranges
9.999 s (0.001-s unit), 99.99 s (0.01-s unit), 999.9 s (0.1-s unit), 9999 s (1-s unit), 99 min 59 s (1-s unit)
999.9 min (0.1-min unit), 9999 min (1-min unit), 99 h 59 min (1-min unit), 999.9 h (0.1-h unit), 9999 h (1-h unit)
8-pin socket
Set value: 6-mm-high characters, green
Timer mode
Elapsed time (Up), remaining time (Down) (selectable)
Input signals
Signal, reset, gate
Signal, reset
Input method
No-voltage input/voltage input (switchable)
No-voltage Input
ON impedance: 1 kΩ max. (Leakage current: 5 to 20 mA when 0 Ω)
ON residual voltage: 3 V max.
OFF impedance: 100 kΩ min.
Voltage Input
High (logic) level: 4.5 to 30 VDC
Low (logic) level: 0 to 2 VDC
(Input resistance: approx. 4.7 kΩ)
No-voltage Input
ON impedance: 1 kΩ max. (Leakage current: 5 to 20 mA when 0 Ω)
ON residual voltage: 3 V max.
OFF impedance: 100 kΩ min.
Signal, reset, gate
Minimum input signal width: 1 or 20 ms (selectable, same for all input)
Reset system
Power resets (except for A-3, b-1, and F modes), external and manual reset
Power reset
Minimum power-opening time: 0.5 s (except for A-3, b-1, and F mode)
Reset voltage
10% max. of rated supply voltage
Sensor waiting time
250 ms max. (Control output is turned OFF and no input is accepted during sensor waiting time.)
Output modes
A, A-1, A-2, A-3, b, b-1, d, E, F, Z, ton or toff
One-shot output time
0.01 to 99.99 s
Control output
SPDT contact output: 5 A at 250 VAC/30 VDC, resistive load (cosφ=1)
Minimum applied load: 10 mA at 5 VDC (failure level: P, reference value)
Transistor output: NPN open collector, 100 mA at 30 VDC max.
residual voltage: 1.5 VDC max. (Approx. 1 V)
Leakage current: 0.1 mA max.
Output category according to EN60947-5-1 for Timers with Contact Outputs (AC-15; 250 V 3 A/AC-13; 250 V 5 A/
DC-13; 30 V 0.5 A)
Output category according to EN60947-5-2 for Timers with Transistor Outputs (DC-13; 30 V 100 mA)
NEMA B300 Pilot Duty, 1/4 HP 5-A resistive load at 120 VAC, 1/3 HP 5-A resistive load at 240 VAC
Key protection
Yes
Memory backup
EEPROM (overwrites: 100,000 times min.) that can store data for 10 years min.
Ambient temperature
Operating:
Storage:
Ambient humidity
25% to 85%
−10 to 55°C (−10 to 50°C if timers are mounted side by side) (with no icing or condensation)
−25 to 65°C (with no icing or condensation)
Case color
Black (N1.5)
Attachments
Waterproof packing,
flush mounting adapter,
label for DIP switch settings
Label for DIP switch settings
None
Note 1. Inrush current will flow for a short time when the power supply is turned ON. Refer to Inrush Current (Reference Values) on page 6.
2. The display is lit only when the power is ON.
4
H5CX-A/-L
■ Characteristics
Item
H5CX-A@/-A11@/-L8@
Accuracy of operating time Power-ON start: ±0.01% ±50 ms max. Rated against set value
and setting error (including Signal start: ±0.005% ±30 ms max. Rated against set value
temperature and voltage inSignal start for transistor output model: ±0.005% ±3 ms max. (See note 2.)
fluences) (See note 1.)
If the set value is within the sensor waiting time at startup the control output of the H5CX will not turn ON until the
sensor waiting time passes.
Insulation resistance
100 MΩ min. (at 500 VDC) between current-carrying terminal and exposed non-current-carrying metal parts, and
between non-continuous contacts
Dielectric strength
2,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and non-current-carrying metal parts
1,000 VAC (for H5CX-@SD), 50/60 Hz for 1 min between control output, power supply, and input circuit (2,000 VAC
for models other than H5CX-@SD)
1,000 VAC, 50/60 Hz for 1 min between non-continuous contacts
Impulse withstand voltage
3 kV (between power terminals) for 100 to 240 VAC, 1 kV for 24 VAC/12 to 24 VDC
4.5 kV (between current-carrying terminal and exposed non-current-carrying metal parts) for 100 to 240 VAC
1.5 kV for 24 VAC/12 to 24 VDC
Noise immunity
±1.5 kV (between power terminals) and ±600 V (between input terminals), square-wave noise by noise simulator
(pulse width: 100 ns/1 µs, 1-ns rise)
Static immunity
Destruction: 15 kV
Malfunction: 8 kV
Vibration resistance
Destruction: 10 to 55 Hz with 0.75-mm single amplitude each in three directions, 2 hours each
Malfunction: 10 to 55 Hz with 0.35-mm single amplitude each in three directions, 10 min each
Shock resistance
Destruction: 294 m/s2 each in three directions
Malfunction: 196 m/s2 each in three directions
Life expectancy
Mechanical: 10,000,000 operations min. (under no load at 18,000 operations/h)
Electrical:
100,000 operations min. (5 A at 250 VAC, resistive load at 1,800 operations/h)
See Life-test Curve on page 6.
Approved safety standards UL508/Listing, UL50 Type 4X for indoor use (enclosure rating), CSA C22.2 No. 14, conforms to EN61812-1 (Pollution
(See notes 3 and 4.)
degree 2/overvoltage category III)
Conforms to VDE0106/P100 (finger protection).
EMC
(EMI)
Emission Enclosure:
Emission AC mains:
(EMS)
Immunity ESD:
Immunity RF-interference:
EN61812-1
EN55011 Group 1 class A
EN55011 Group 1 class A
EN61812-1
EN61000-4-2:
6 kV contact discharge (level 2)
8 kV air discharge (level 3)
EN61000-4-3:
10 V/m (Amplitude-modulated, 80 MHz to 1 GHz) (level 3);
10 V/m (Pulse-modulated, 900 MHz ±5 MHz) (level 3)
Immunity Conducted
Disturbance:
Immunity Burst:
EN61000-4-6:
EN61000-4-4:
Immunity Surge:
EN61000-4-5:
Immunity Voltage Dip/Interruption EN61000-4-11:
10 V (0.15 to 80 MHz) (level 3)
2 kV power-line (level 3);
1 kV I/O signal-line (level 4)
1 kV line to lines (power and output lines) (level 3);
2 kV line to ground (power and output lines) (level 3)
0.5 cycle, 100% (rated voltage)
Degree of protection
Panel surface: IP66 and NEMA4 (indoors), and UL Type 4X (indoors) (See note 4.)
Weight
H5CX-A@: Approx. 135 g, H5CX-A11@/-L8@: Approx. 105 g
Note 1. The values are based on the set value.
2. The value is applied for a minimum pulse width of 1 ms.
3. To meet UL listing requirements with H5CX-L8@/-A11@ models, an OMRON P2CF-08-@ or P3G-08 Socket must be mounted on the Timer.
Otherwise, H5CX-L8@/-A11@ models are considered to meet UL508 recognition requirements.
4. The Y92S-29 Waterproof Packing and Y92F-30 Flush Mounting Adapter are necessary to ensure IP66, NEMA4, and UL Type 4X waterproofing between the H5CX and installation panel.
5
H5CX-A/-L
Switching operations (×104)
■ Life-test Curve (Reference Values)
1,000
500
100
30 VDC L/R=7 ms
50
250 VDC/30 VDC
cosφ=1
10
250 VAC cosφ=0.4
0
1
2
3
4
5
Load current (A)
Reference:
A maximum current of 0.15 A can be switched at
125 VDC (cosφ=1) and a maximum current of 0.1 A
can be switched if L/R is 7 ms. In both cases, a life of
100,000 operations can be expected. The minimum
applicable load is 10 mA at 5 VDC (failure level: P).
■ Inrush Current (Reference Values)
Voltage
Applied voltage
Inrush current
(peak value)
Time
100 to 240 VAC
264 VAC
5.3 A
0.4 ms
24 VAC/
12 to 24 VDC
26.4 VAC
6.4 A
1.4 ms
26.4 VDC
4.4 A
1.7 ms
6
H5CX-A/-L
Connections
■ Block Diagram
(Basic insulation)
Power supply
circuit
Output circuit
(See note.)
(Basic insulation)
Display circuit
Internal control
circuit
Input circuit
Key switch
circuit
Note: Power circuit is not insulated from the input circuit, except for H5CX-A11/-A11S, which have basic insulation.
■ I/O Functions
Inputs
Outputs
Start signal
Stops timing in A-2 and A-3 (power ON delay) modes.
Starts timing in other modes.
Reset
Resets present value. (In elapsed time mode, the present value returns to 0; in remaining time
mode, the present value returns to the set value.)
Count inputs are not accepted and control output turns OFF while reset input is ON.
Reset indicator is lit while reset input is ON.
Gate
Inhibits timer operation. (The timer will be reset if the reset input turns ON while the gate input is
ON.)
Control output (OUT)
Outputs take place according to designated operating mode when timer reaches corresponding set
value.
7
H5CX-A/-L
■ Terminal Arrangement
Confirm that the power supply meets specifications before use.
6
7
8
9
6
Gate
Input use 0 V
Unused
Signal
Gate
Signal
Reset
Input use 0 V
Reset
H5CX-AS/-ASD
H5CX-A/-AD
7
8
9
Unused
10
10
Unused Unused Unused
Unused Unused Unused
11
12
11
12
1
1
2
13
13
3
4
2
3
4
5
5
Transistor output
Contact output
(−)
(−)
(+)
(+)
The power supply and input circuit are not insulated.
(See note 2.)
Terminals 1 and 6 of the H5CX-AD are connected internally.
The power supply and input circuit are not insulated.
(See note 2.)
Terminals 1 and 6 of the H5CX-ASD are connected internally.
H5CX-A11S/-A11SD
H5CX-A11/-A11D
Reset
Reset
Signal
Signal
Gate
Internal circuit
Gate
Internal circuit
5 6 7
5 6 7
Unused
4
8
Unused
4
8
0V
3
9
10
0V
3
9
10
2
1 11
2
Contact output
Unused
1 11
Transistor output
Unused
(−) (+)
(−) (+)
The power supply and input circuit of the
H5CX-A11 have basic insulation.
The power supply and input circuit of the
H5CX-A11D are not insulated. (See note 2.)
Terminals 2 and 3 of the H5CX-A11D are
connected internally.
The power supply and input circuit of the
H5CX-A11S have basic insulation.
The power supply and input circuit of the
H5CX-A11SD are not insulated. (See note 2.)
Terminals 2 and 3 of the H5CX-A11SD are
connected internally.
H5CX-L8S/-L8SD
H5CX-L8/-L8D
Internal circuit
Internal circuit
Signal
Reset
Signal
4
5
3
6
7
2
1
Unused
Reset
Contact output
8
4
5
3
6
7
2
1
0V
Transistor output
8
0V
(−) (+)
(−) (+)
The power supply and input circuit are
not insulated. (See note 2.)
Terminals 1 and 2 of the H5CX-L8D are
connected internally.
The power supply and input circuit are
not insulated. (See note 2.)
Terminals 1 and 2 of the H5CX-L8SD
are connected internally.
Note 1. Do not connect unused terminals as relay terminals.
2. The power supply and input circuit are not insulated, so unwanted current from the AC power supply may burn out internal parts. Refer to
Safety Precautions (H5CX-A/-L) on page 49 for wiring details.
8
H5CX-A/-L
■ Input Circuits
Signal, Reset, and Gate Input
+14 V
1 kΩ
IN
Internal circuit
Note: When using no-voltage input (NPN input).
■ Input Connections
The inputs of the H5CX-A@/-A11@ are no-voltage (short-circuit or open) inputs or voltage inputs.
The input of the H5CX-L8@ is no-voltage input only.
Note: Power circuit is not insulated from the input circuit, except for H5CX-A11/-A11S, which have basic insulation. For wiring, refer to Safety Precautions (H5CX-A/-L) on page 49.
No-voltage Inputs (NPN Inputs)
Contact Input
Open Collector
Voltage Output
(Connection to NPN open
collector output sensor)
(Connection to a voltage output
sensor)
PC or sensor
DC Two-wire Sensor
H5CX-A@
H5CX-A11@
H5CX-L8@
H5CX-A@
H5CX-A11@
H5CX-L8@
Operate with transistor ON
Operate with transistor ON
H5CX-A@
H5CX-A11@
H5CX-L8@
H5CX-A@
H5CX-A11@
H5CX-L8@
Operate with relay ON
Operate with transistor ON
Gate input
Signal input
Input
0V
Reset input
Gate input
Signal input
Input
0V
Reset input
Gate input
Signal input
Input
0V
Reset input
Gate input
Signal input
Input
0V
Reset input
Sensor
No-voltage Input Signal Levels
Applicable Two-wire Sensor
No-contact input
Leakage current:
Switching capacity:
Residual voltage:
Operating voltage:
Short-circuit level
Transistor ON
Residual voltage: 3 V max.
Impedance when ON: 1 kΩ max.
(the leakage current is about 12 mA when the
impedance is 0 Ω)
1.5 mA max.
5 mA min.
3.0 VDC max.
10 VDC
Open level
Transistor OFF
Impedance when OFF: 100 kΩ min.
Contact input
Use contact which can adequately switch
5 mA at 10 V
Note: The DC voltage must be 30 VDC max.
9
H5CX-A/-L
Voltage Inputs (PNP Inputs)
No-contact Input
(NPN Transistor)
No-contact Input
(PNP Transistor)
(Connection to NPN open
collector output sensor)
(Connection to PNP open
collector output sensor)
Contact Input
H5CX-A@
H5CX-A11@
H5CX-A@
H5CX-A11@
Operate with transistor ON
Operate with transistor OFF
Gate input
Signal input
Input
0V
Reset input
Gate input
Input
0V
Reset input
Gate input
Signal input
Input
Reset input
0V
Signal input
Sensor
Sensor
H5CX-A@
H5CX-A11@
Operate with relay ON
Voltage Input Signal Levels
High level (Input ON):
Low level (Input OFF):
Input resistance:
4.5 to 30 VDC
0 to 2 VDC
Approx. 4.7 kΩ
Note: The DC voltage must be 30 VDC max.
10
H5CX-A/-L
Nomenclature
Operation Key
Indicator
Reset Indicator (orange)
Mode Key
(Changes modes and setting items)
Key Protection Indicator (orange)
Reset Key
(Resets present value and output)
Control Output Indicator (orange)
Present Value
(red or green (programmable) for
H5CX-A models, red for H5CX-A11
/-L models)
Character height: 11.5 mm
Time Unit Display (Color is same as
present value and set value.):
(If the time range is 0 min, 0 h, 0.0 h, or
0 h 0 min, this display flashes to
indicate timing operation.)
Up Keys 1 to 4
Down Keys 1 to 4
Front View
Front color: Black
Switches
Key-protect Switch
(Default setting) OFF
ON
Set Value (green)
Character height: 6 mm
Set Value 1, 2 Display
DIP Switch
Case color: Black
1
2
3
4
5
6
7
8
ON
OFF
Note 1: All the pins are factory-set to OFF.
2: There is no DIP switch on the H5CX-L8@.
11
H5CX-A/-L
Dimensions
Note: All units are in millimeters unless otherwise indicated.
■ Dimensions without Flush Mounting Adapter
H5CX-A/-AS (Flush Mounting Models)
48x48
6
100
44.8x44.8
Note:
M3.5 terminal screw (effective length: 6 mm)
H5CX-AD/-ASD (Flush Mounting Models)
48x48
6
64
44.8x44.8
Note:
M3.5 terminal screw (effective length: 6 mm)
H5CX-A11/-A11S (Flush Mounting/Surface Mounting Models)
48x48
6
14.4
72.5
44.8x44.8
H5CX-A11D/-A11SD (Flush Mounting/Surface Mounting Models)
48x48
6
63.7
14.4
H5CX-A11D
44.8x44.8
H5CX-L8@ (Flush Mounting/Surface Mounting Models)
48x48
6
63.7
14.3
44.8x44.8
12
H5CX-A/-L
■ Dimensions with Flush Mounting Adapter
H5CX-A/-AS (Provided with Adapter and Waterproof Packing)
Y92S-29 (provided)
Waterproof Packing
Panel
Y92F-30 (provided)
Flush Mounting Adapter
(51)
58
48
7.5
98.5
H5CX-AD/-ASD (Provided with Adapter and Waterproof Packing)
Y92S-29 (provided)
Waterproof Packing
58
Panel
Y92F-30 (provided)
Flush Mounting Adapter
(51)
Panel Cutouts
Panel cutouts areas
shown below.
(according to DIN43700).
48
7.5
62.5
60 min.
45 +0.6
−0
H5CX-A11/-A11S (Adapter and Waterproof Packing Ordered Separately)
Y92S-29 (order separately)
Waterproof Packing
58
Panel
45 +0.6
−0
Y92F-30 (order separately)
Flush Mounting Adapter
60 min. 15 min.
P3GA-11
(order separately)
Rear Surface
Connection
Socket
(51)
48
7.5
98.7
H5CX-A11D/-A11SD (Adapter and Waterproof Packing Ordered Separately)
Y92S-29 (order separately)
Waterproof Packing
Panel
Note 1. The mounting panel thickness
should be 1 to 5 mm.
2. To allow easier operability, it is
recommended that Adapters are
mounted so that the gap between
sides with hooks is at least 15 mm.
3. It is possible to mount timers side
by side, but only in the direction
without the hooks.
Y92F-30 (order separately)
Flush Mounting Adapter
n side by side mounting
P3GA-11
(order separately)
Rear Surface
Connection
Socket
(51)
58
A
A = (48n − 2.5) +1
0
With Y92A-48F1 attached.
A = {48n−2.5 + (n−1) x 4} +1
0
48
With Y92A-48 attached.
A = (51n−5.5) +1
0
89.9
7.5
H5CX-L8@ (Adapter and Waterproof Packing Ordered Separately)
Y92S-29 (order separately)
Waterproof Packing)
Panel
Y92F-30 (order separately)
Flush Mounting Adapter
P3G-08
(order separately)
Rear Surface
Connection
Socket
58
(51)
48
7.5
84.8
13
H5CX-A/-L
■ Dimensions with Front Connecting Socket
112
H5CXA11/
-A11S
109.7
103.2
H5CXA11D/
-A11SD
H5CXL8@
100.9
P2CF-08-@
P2CF-11-@
P2CF-11-@
90
92.3
Note: These dimensions vary with the kind of DIN track (reference value).
■ Accessories (Order Separately)
Note: All units are in millimeters unless otherwise indicated.
Track Mounting/Front Connecting Socket
P2CF-08
Eight,
M3.5 x 7.5 sems
7.8
4.5
3
70 max.
35.4
Terminal Arrangement/
Internal Connections
(Top View)
Two, 4.5 dia.
holes
Surface Mounting Holes
4
50 max.
Two, 4.5 dia. or two, M4
20.3 max.
P2CF-08-E (Finger Safe Terminal Type)
Conforming to VDE0106/P100
Eight,
M3.5 x 7.5 sems
40±0.2
5
7.8
4.5
3
1.3
70 max.
35.4
Two, 4.5 dia.
holes
4
40±0.2
19
50 max.
20.3
21.5 max.
14
H5CX-A/-L
Track Mounting/Front Connecting Socket
P2CF-11
Eleven,
7.8
M3.5 x 7.5 sems
3
4.5
70 max.
Terminal Arrangement/
Internal Connections
(Top View)
35.4
Two, 4.5 dia.
holes
Surface Mounting Holes
Two, 4.5 dia. or two, M4
4
50 max.
31.2 max.
40±0.2
P2CF-11-E (Finger Safe Terminal Type)
Conforming to VDE0106/P100
Eleven,
M3.5 x 7.5 sems
4.5
5
7.8
3
1.2
70 max.
35.4
Two, 4.5 dia.
holes
4
40±0.2
30
50 max.
Back Connecting Socket
P3G-08
31.2 max.
Terminal Arrangement/
Internal Connections
(Bottom View)
27 dia.
45
45
4.9
17
P3GA-11
Terminal Arrangement/
Internal Connections
(Bottom View)
27 dia.
45
25.6
45
4.5
16.3
6.2
Finger Safe Terminal Cover
Conforming to VDE0106/P100
Y92A-48G
(Attachment for P3G-08/P3GA-11
Socket)
Twelve, 6.4 dia. holes
34
47.7 x 47.7
16.5
48 x 48
24.6 27.6
47.4
15
H5CX-A/-L
Note: 1. Depending on the operating environment, the condition of
resin products may deteriorate, and may shrink or become
harder. Therefore, it is recommended that resin products
are replaced regularly.
2. The H5CX’s panel surface is water-resistive (conforming to
IP66) and so even if drops of water penetrate the gaps between the keys, there will be no adverse effect on internal
circuits. If, however, there is a possibility of oil being present
on the operator’s hands, use the Soft Cover. The Soft Cover
ensures protection equivalent to IP54 against oil. Do not,
however, use the H5CX in locations where it would come in
direct contact with oil.
Soft Cover
Y92A-48F1
Hard Cover
Y92A-48
Flush Mounting Adapter
(provided with models with H5CX-A/AD/AS/ASD)
Y92F-30
Waterproof Packing
(provided with models with H5CX-A/AD/AS/ASD)
Y92S-29
Note: Order the Flush Mounting Adapter separately if it is lost or damaged.
Mounting Track
PFP-100N, PFP-50N
Note: Use Waterproof Packing to provide a level of water protection
that complies with NEMA4, UL Type 4X, or IP66 standards. Order the Waterproof Packing separately if it is lost or damaged.
Depending on the operating environment, the Waterproof
Packing may deteriorate, contract, or harden and so regular replacement is recommended.
PFP-100N2
16
7.3±0.15
4.5
4.5
15 25
25
10
25
1,000 (500)
(See note.)
10
35±0.3
27±0.15
35±0.3
25 *
15
1
25
25 15
25
25
10
1,000
27
24
1
10
29.2
1.5
Note: The values shown in parentheses are for the PFP-50N.
End Plate
PFP-M
Spacer
PFP-S
10
6.2
16
12
5
1.8
1
50
1.8
11.5
10 M4 x 8
pan head
screw
35.5 35.3
34.8
44.3
1.3
4.8
16.5
16
H5CX-A/-L
Operating Procedures
■ Setting Procedure Guide
Settings for Timer Operation
Use the following settings for all models except the H5CX-L8@.
Refer to page 19 for the H5CX-L8@.
When Using Basic Functions Only
•
•
•
•
Basic Functions
Time range (0.001 s to 999.9 h,
except 9999 h and 9999min)
Output mode (A, A-2, E, F)
Timer mode (UP/DOWN)
Input signal width (20 ms/1 ms)
The settings can be performed easily with the DIP switch.
➡For details on the setting methods, refer to page 18.
1
2
3
4
5
6
7
8
ON
OFF
When Using Other Time Ranges
(9999 h, 9999 min) and Output
Modes (A-1, A-3, b, b-1, d, and Z)
When Using More Detailed Setting Items
(Output Time, NPN/PNP Input Mode,
Display Color, Key Protect Level)
All the functions can be set with the operation keys.
➡For details on the setting methods, refer to page 19.
Setting for items other than the basic functions can be
performed with the operation keys.
➡For details on the setting methods, refer to page 19.
Note: At the time of delivery, the H5CX is set for timer operation.
Settings for Twin Timer Operation
Use the following settings for all models except the H5CX-L8@.
Refer to page 27 for the H5CX-L8@.
When Using Basic Functions Only
Basic Functions
• Time range (0.01 s to 99 min 59 s)
• ON/OFF start mode
(flicker OFF start/flicker ON start)
• Timer mode (UP/DOWN)
• Input signal width (20 ms/1 ms)
The settings can be performed easily with the DIP switch.
➡For details on the setting methods, refer to page 26.
1
2
3
4
5
6
7
8
ON
OFF
When Using Other Time Ranges
(999.9 min, 9999 min, 99 h 59 min,
999.9 h, 9999 h, 9.999 s)
All the functions can be set with the operation keys.
➡For details on the setting methods, refer to page 27.
When Using More Detailed Setting Items
(NPN/PNP Input Mode, Display Color, Key
Protect Level)
Setting for items other than the basic functions can be
performed with the operation keys.
➡For details on the setting methods, refer to page 27.
Note: At the time of delivery, the H5CX is set for timer operation.
17
H5CX-A/-L
■ Operating Procedures (Timer Function)
Settings for Basic Functions
Settings for basic functions can be performed with just the DIP switch.
Be sure to set pin 1 to ON when using the DIP switch.
1
2
3
4
5
6
7
8
ON
OFF
Item
1
2
OFF
ON
DIP switch settings enable/
disable
Disabled
Enabled
Time range
Refer to the table on the right.
3
4
5
Pin 2
Pin 3
ON
ON
OFF
ON
Pin 4
Time range
ON
0.001 s to 9.999 s
OFF
OFF
0.01 s to 99.99 s
OFF
OFF
0.1 s to 999.9 s
OFF
ON
OFF
1 s to 9999 s
ON
ON
OFF
0 min 01 s to 99 min
59 s
Output mode
Refer to the table on the right.
OFF
OFF
ON
0.1 min to
999.9 min
7
Timer mode
Elapsed time
(UP)
Remaining time
(DOWN)
ON
OFF
ON
0 h 01 min to
99 h 59 min
8
Input signal
width
20 ms
1 ms
OFF
ON
ON
0.1 h to 999.9 h
6
Note: All the pins are factory-set to OFF.
Pin 5
Pin 6
Output mode
OFF
OFF
A mode (signal ON delay
(I): power reset operation)
ON
OFF
A-2 mode: (power ON delay (I): power reset operation)
Easy Confirmation of Switch Settings Using Indicators
OFF
ON
The ON/OFF status of the DIP switch pins can be
confirmed using the front display. For details, refer to page 31.
E mode (interval: power
reset operation)
ON
ON
F mode (accumulative:
power hold operation)
Note 1. Be sure to set pin 1 of the DIP switch to ON. If it is set to OFF, the DIP switch settings will not be enabled.
2. Changes to DIP switch settings are enabled when the power is turned ON. (Perform DIP switch settings while the power is OFF.)
3. There is no DIP switch on the H5CX-L8@. For details on the setting methods, refer to page 19.
4. When using time ranges or output modes that cannot be set with the DIP switch, all of the settings have to be made using the operation
keys. For details on the setting methods, refer to page 19.
Detailed Settings
After making DIP switch settings for basic functions, detailed settings (see note) can be added using the operation keys.
For details, refer to page 19.
Note: Output time, NPN/PNP input mode, display color, key protect level.
18
H5CX-A/-L
Settings for Advanced Functions
Settings that cannot be performed with the DIP switch are performed with the operation keys.
Power ON
Run mode
For details on operations in run mode, refer to page 21.
Note 1. If the mode is switched to the function setting mode during operation,
operation will continue.
2. Changes made to settings in function setting mode are enabled for the
first time when the mode is changed to run mode. Also, when settings
are changed, the timer is reset (time initialized and output turned OFF).
See note 1.
See note 2.
The characters displayed in reverse video are the default settings.
3 s min.
3 s min.
When performing settings with operation keys only, set pin1 of the
DIP switch to OFF (factory setting). If pin 1 of the DIP switch is set
to ON, the setting items indicated in
will not be displayed.
Set the time range using the
keys.
Time range
s
s
......
s
h
s
For details, refer to Time Range List below.
Set the timer mode using the
keys.
Timer mode
(Elapsed
time)
Output mode
Set the output mode using the
Function setting mode
(A)
Output time
(Remaining
time)
(A-1)
(A-2)
(A-3)
keys.
(b)
(b-1)
(d)
Set each digit for the output time using the corresponding
: Output hold/0.01 to 99.99 s
(If the output time is set to 0.00,
is displayed.)
Displayed for modes A, A-1, A-2, A-3, b, and b-1 only.
Input signal
width
Set the input signal width using the
keys.
(E)
(F)
(Z)
keys.
Time Range List
Display
Set Value
0.01 s to 99.99 s
(default setting)
0.1 s to 999.9 s
(20 ms)
(1 ms)
1 s to 9999 s
NPN/PNP
input mode
Set the NPN/PNP input mode using the
keys.
(NPN input) (PNP input)
Only displayed for H5CX-A@ and H5CX-A11@ models.
0 min 01 s to 99 min 59 s
0.1 min to 999.9 min
1 min to 9999 min
Display color
Set the display color using the
keys.
0 h 01 min to 99 h 59 min
(Red) (Green) Red-green Green-red
Displayed for terminal-block models (H5CX-A@) only.
Key protect
level
Set the key protect level using the
keys.
0.1 h to 999.9 h
1 h to 9999 h
0.001 s to 9.999 s
(KP-1)
(KP-2)
(KP-3)
(KP-4)
(KP-5)
19
H5CX-A/-L
Explanation of Functions
Input Signal Width (iflt) (Setting possible using DIP
switch.)
Time Range (timr) (Setting possible using DIP switch.)
Set the range to be timed in the range 0.000 s to 9,999 h. Settings of
type ---- h (9,999 h) and ---- min (9,999 min) cannot, however, be
made with the DIP switch. Use the operation keys if these settings
are required.
Set the minimum signal input width (20 ms or 1 ms) for signal, reset,
and gate inputs. The same setting is used for all external inputs (signal, reset, and gate inputs). If contacts are used for the input signal,
set the input signal width to 20 ms. Processing to eliminate chattering is performed for this setting.
Timer Mode (timm) (Setting possible using DIP switch.)
NPN/PNP Input Mode (imod)
Set either the elapsed time (UP) or remaining time (DOWN) mode.
Select either NPN input (no-voltage input) or PNP input (voltage
input) as the input format. The same setting is used for all external
inputs. For details on input connections, refer to Input Connections
on page 9.
Output Mode (outm) (Setting possible using DIP switch.)
Set the output mode. The possible settings are A, A-1, A-2, A-3, b, b1, d, E, F, and Z. Only output modes A, A-2, E, and F can be set
using the DIP switch. Use the operation keys if a different setting is
required. (For details on output mode operation, refer to Timing
Charts on page 22.)
Display Color (colr)
Set the color used for the present value.
Output OFF
Output ON
Output Time (otim)
red
Red (fixed)
When using one-shot output, set the output time for one-shot output
(0.01 to 99.99 s). One-shot output can be used only if the selected
output mode is A, A-1, A-2, b, or b-1. If the output time is set to 0.00,
hold is displayed, and the output is held.
grn
Green (fixed)
r-g
Red
Green
g-r
Green
Red
Key Protect Level (kypt)
Set the key protect level.
When the key-protect switch is set to ON, it is possible to prevent setting errors by prohibiting the use of certain operation keys by specifying the
key protect level (KP-1 to KP-5). The key protect indicator is lit while the key-protect switch is set to ON.
(See note)
OFF ON
Note: Factory-set to OFF
Key protect indicator
Level
Meaning
Details
Changing mode
(See note.)
Switching display
during operation
Reset key
Up/down key
KP-1
(default setting)
No
Yes
Yes
Yes
KP-2
No
Yes
No
Yes
KP-3
No
Yes
Yes
No
KP-4
No
Yes
No
No
KP-5
No
No
No
No
Note: Changing mode to timer/twin timer selection mode (
MODE
+
1
1 s min.) or function setting mode (
MODE
3 s min.).
20
H5CX-A/-L
Operation in Run Mode
When Output Mode Is Not Z
Present value
Set each digit for the set value using the corresponding
keys.
Set value
When Output Mode Z Is Selected
Present value
Set each digit for the ON duty ratio using the corresponding
(The
keys for the 4th digit cannot be used.)
keys.
ON duty ratio
Present value
Set each digit for the cycle time using the corresponding
keys.
Cycle time
Present Value and Set Value
Present Value and Cycle Time (Output Mode = Z)
These items are displayed when the power is turned ON. The
present value is displayed in the main display and the set value is
displayed in the sub-display. The values displayed will be determined
by the settings made for the time range and the timer mode in function setting mode.
The present value is displayed in the main display and the cycle time
is displayed in the sub-display. “SET2” lights at the same time.
Set the cycle time used in ON/OFF-duty adjustable flicker mode (Z).
Present Value and ON Duty Ratio (Output Mode = Z)
Elapsed cycle time
The present value is displayed in the main display and the ON duty
ratio is displayed in the sub-display. “SET1” lights at the same time.
ON duty set as a percentage
Set the ON duty ratio used in ON/OFF-duty adjustable flicker mode
(Z) as a percentage.
Up/down keys used for analog
adjustment of the ON duty
If a cycle time is set, cyclic control can be performed in ON/OFF-duty
adjustable flicker mode simply by changing the ON duty ratio.
ON time = Cycle time ×
ON duty ratio (%)
100
The output accuracy will vary with the time range, even if the ON duty
ratio setting is the same. Therefore, if fine output time adjustment is
required, it is recommended that the time range for the cycle time is
set as small as possible.
Cycle time
Close
Open
ON duty (%)
Output control
Opening/closing valve
ON duty
Fully closed↔Fully open
0%↔100%
Examples:
1. If the cycle time is 20 s, the ON duty ratio is 31%, and the time
range is 1 s to 9999 s, the ON time is given by the following:
20 (s) × 31 (%) = 6.2 (s) → Rounded off to the nearest integer
100
(because of the time range setting) → ON time = 6 s
2. If the cycle time is 20.00 s, the ON duty ratio is 31%, and the time
range is 0.01 s to 99.99 s, the ON time is given by the following:
31 (%)
= 6.200 (s) → Rounded off to 2 decimal places
100
(because of the time range setting) → ON time = 6.20 s
20.00 (s) ×
21
H5CX-A/-L
Timing Charts
Timer Operation
The gate input is not included in the H5CX-L8@ models.
One-shot output
t
Sustained output
Either one-shot output or sustained output can be selected.
Output mode A: Signal ON delay 1 (Timer resets when power comes ON.)
Timing starts when the start signal goes ON.
While the start signal is ON, the timer starts when the
power comes ON or when the reset input goes OFF.
The control output is controlled using a sustained or
one-shot time period.
Power
Start signal
Gate
Basic Operation
Reset
t
t
Power
Control output
Start signal **
input
Set value
Timing
diagram
UP
Timing
Output
0
Set value
DOWN
* Output is instantaneous when setting is 0.
** Start signal input is disabled during timing.
Output mode A-1: Signal ON delay 2 (Timer resets when power comes ON.)
0
Timing starts when the start signal goes ON, and is
reset when the start signal goes OFF.
While the start signal is ON, the timer starts when the
power comes ON or when the reset input goes OFF.
The control output is controlled using a sustained or
one-shot time period.
Power
Start signal
Gate
Basic Operation
Reset
Power
t
Control output
Start signal
input
Set value
Timing
diagram
UP
Timing
Output
0
* Output is instantaneous when setting is 0.
Set value
DOWN
0
Output mode A-2: Power ON delay 1 (Timer resets when power comes ON.)
Timing starts when the reset input goes OFF.
The start signal disables the timing function (i.e., same
function as the gate input).
The control output is controlled using a sustained or
one-shot time period.
Power
Start signal
Gate
Basic Operation
Reset
Power
t
* Output is instantaneous when setting is 0.
Set value
Timing
diagram
Timing
Output
Control output
UP
0
Set value
DOWN
0
Output mode A-3: Power ON delay 2 (Timer does not reset when power comes ON.)
Timing starts when the reset input goes OFF.
The start signal disables the timing function (i.e.,
same function as the gate input).
The control output is controlled using a sustained or
one-shot time period.
Power
Start signal
Basic Operation
Gate
Power
Reset
t
Control output
Set value
Timing
diagram
t
t
Output
Timing
Sustained
* Output is instantaneous when setting is 0.
UP
0
Set value
DOWN
0
22
H5CX-A/-L
.
Output mode b: Repeat cycle 1 (Timer resets when power comes ON.)
Sustained
Output
Timing starts when the start signal goes ON.
The status of the control output is reversed when time
is up (OFF at start).
While the start signal is ON, the timer starts when the
power comes ON or when the reset input goes OFF.
Power
Start signal
Basic Operation
Gate
Power
Reset
Start signal **
input
Control output
Timing
Timing
Timing
Timing
Output
Set value
UP
Timing
diagram
0
*
Normal output operation will not be possible if the
set time is too short.
Set the value to at least 100 ms (contact output
type).
** Start signal input is disabled during timing.
Set value
DOWN
0
One-shot
Output
Timing starts when the start signal goes ON.
The control output is turned ON when time is up.
While the start signal is ON, the timer starts when the
power comes ON or when the reset input goes OFF.
Power
Start signal
Basic Operation
Gate
Power
Start signal **
input
Reset
t
t
Timing
Timing Timing
Timing
Control output
Output
Set value
Timing
diagram
UP
*
Normal output operation will not be possible if the
set time is too short.
Set the value to at least 100 ms (contact output
type).
** Start signal input is disabled during timing.
0
Set value
DOWN
0
Output mode b-1: Repeat cycle 2 (Timer does not reset when power comes ON.)
Sustained
Output
Timing starts when the start signal goes ON.
The status of the control output is reversed when time
is up (OFF at start).
While the start signal is ON, the timer starts when the
power comes ON or when the reset input goes OFF.
Power
Start signal
Basic Operation
Gate
Power
Reset
Timing
Control output
Set value
Timing
diagram
Output
UP
0
*
Normal output operation will not be possible if the
set time is too short.
Set the value to at least 100 ms (contact output
type).
** Start signal input is disabled during timing.
Set value
DOWN
0
One-shot
Output
Sustained Timing
Start signal **
input
Timing starts when the start signal goes ON.
The control output comes ON when time is up.
While the start signal is ON, the timer starts when
power comes ON or when the reset input goes OFF.
Power
Start signal
Basic Operation
Gate
Power
Timing
Reset
t
Control output
t
t
t
t
Set value
Timing
diagram
Sustained Timing
Start signal **
input
Output
UP
0
Set value
DOWN
0
*
Normal output operation will not be possible if the
set time is too short.
Set the value to at least 100 ms (contact output
type).
** Start signal input is disabled during timing.
23
H5CX-A/-L
Output mode d: Signal OFF delay (Timer resets when power comes ON.)
The control output is ON when the start signal is ON
(except when the power is OFF or the reset is ON).
The timer is reset when the time is up.
Power
Start signal
Basic Operation
Gate
Power
Reset
Start signal **
input
Timing
Control output
Output
Set value
Timing
diagram
UP
*
0
Set value
Output functions only during start signal input when
setting is 0.
** Start signal input is enabled during timing.
DOWN
0
Output mode E: Interval (Timer resets when power comes ON.)
Timing starts when the start signal comes ON.
The control output is reset when time is up.
While the start signal is ON, the timer starts when
power comes ON or when the reset input goes OFF.
Power
Start signal
Basic Operation
Gate
Power
Reset
Start signal **
input
Control output
Set value
Timing
Output
UP
Timing
diagram
0
Set value
DOWN
* Output is disabled when the setting is 0.
** Start signal input is enabled during timing.
0
Output mode F: Cumulative (Timer does not reset when power comes ON.)
Start signal enables timing (timing is stopped when the
start signal is OFF or when the power is OFF).
A sustained control output is used.
Power
Start signal
Basic Operation
Gate
Power
Reset
Start signal
input
Control output
Timing
Output
Set value
Timing
diagram
Timing
Sustained
* Output is instantaneous when setting is 0.
UP
0
Set value
DOWN
0
Z mode: ON/OFF-duty adjustable flicker
Power
Start signal
Gate
Timing starts when the start signal goes ON.
The status of the control output is reversed
when time is up (ON at start).
While the start signal is ON, the timer starts when power
comes ON or when the reset input goes OFF.
Basic Operation
Power
Reset
Control output
Start signal **
input
Cycle time
UP
Timing
ON duty (%)
ON duty setting
(%) ON time
Timing
diagram
Timing
(cycle time)
0
Timing
(cycle time)
Timing
ON duty (%)
Output
Cycle time
ON duty setting
(%) ON time
DOWN
0
*
Normal output operation will not be possible if the set
time is too short.
Set the value to at least 100 ms (contact output type).
** Start signal input is disabled during timing.
Z Mode
Output quantity can be adjusted by changing the cycle time set in the adjustment level to 1 and by changing the ON duty (%) set value.
The set value shows the ON duty (%) and can be set to a value between 0 and 100 (%). When the cycle time is 0, the output will always be OFF.
When the cycle time is not 0 and when ON duty has been set to 0 (%), the output will always be OFF. When ON duty has been set to 100 (%), the
output will always be ON.
24
H5CX-A/-L
Self-diagnostic Function
The following displays will appear if an error occurs.
Main display
Sub-display
e1
Not lit
e2
e2
Error
Output status
Correction method
Set value after
reset
CPU
OFF
Either press the reset key or reset the No change
power supply.
Not lit
Memory error (RAM)
OFF
Reset the power supply.
No change
sum
Memory error (EEP)
(See note)
OFF
Reset to the factory settings using
the reset key.
0
Note: This includes times when the life of the EEPROM has expired.
25
H5CX-A/-L
■ Operating Procedures (Twin Timer Function)
Switching from Timer to Twin Timer
The H5CX is factory-set for timer operation. To switch to twin timer operation, use the procedure given below. For details, refer to page 32.
Power ON
Timer/twin timer selection mode
Timer/
twin timer
selection
Run mode
1
+
Hold down for 1 s
min. (See note.)
Note: The
key must be pressed
before the 1 key.
Switch from timer operation (
) to
twin timer (
) operation using the
keys.
Settings for Basic Functions
Settings for basic functions can be performed with just the DIP switch.
Be sure to set pin 1 to ON when using the DIP switch.
1
2
3
4
5
6
7
8
ON
OFF
Item
1
2
DIP switch settings enable/
disable
OFF
Disabled
ON
Enabled
OFF time range Refer to the table on the right.
3
4
ON time range
Refer to the table on the right.
6
ON/OFF start
mode
Flicker OFF
start
7
Timer mode
UP
DOWN
8
Input signal
width
20 ms
1 ms
Pin 2
OFF time range
OFF
0.01 s to 99.99 s
ON
OFF
0.1 s to 999.9 s
OFF
ON
1 s to 9999 s
ON
ON
0 min 01 s to 99 min 59 s
5
Flicker ON start
Pin 3
OFF
Pin 4
OFF
Pin 5
ON time range
OFF
0.01 s to 99.99 s
ON
OFF
0.1 s to 999.9 s
OFF
ON
1 s to 9999 s
ON
ON
0 min 01 s to 99 min 59 s
Note: All the pins are factory-set to OFF.
Easy Confirmation of Switch Settings Using Indicators
The ON/OFF status of the DIP switch pins can be confirmed
using the front display. For details, refer to page 31.
Note 1. Be sure to set pin 1 of the DIP switch to ON. If it is set to OFF, the DIP switch settings will not be enabled.
2. Changes to DIP switch settings are enabled when the power is turned ON. (Perform DIP switch settings while the power is OFF.)
3. There is no DIP switch on the H5CX-L8@. For details on the setting methods, refer to page 27.
4. When using time ranges that cannot be set with the DIP switch, all of the settings have to be made using the operation keys. For details
on the setting methods, refer to page 27.
Detailed Settings
After making DIP switch settings for basic functions, detailed settings (see note) can be added using the operation keys.
For details, refer to page 27.
Note: NPN/PNP input mode, display color, key protect level.
26
H5CX-A/-L
Settings for Advanced Functions
Settings that cannot be performed with the DIP switch are performed with the operation keys.
Power ON
Run mode
For details on operations in run mode, refer to page 29.
Note 1. If the mode is switched to the function setting mode during operation, operation will
continue.
2. Changes made to settings in function setting mode are enabled for the first time when
the mode is changed to run mode. Also, when settings are changed, the timer is reset
(time initialized and output turned OFF).
(See note 1.)
(See note 2.)
The characters displayed in reverse video are the initial values.
3 s min.
3 s min.
OFF time
range
When performing settings with operation keys only, set pin1 of the
DIP switch to OFF (factory setting). If pin 1 of the DIP switch is set
to ON, the setting items indicated by
will not be displayed.
Set the OFF time range using the
s
s
keys.
......
s
h
s
h
s
For details, refer to Time Range List below.
ON time
range
Set the ON timer range using the
s
s
keys.
......
s
For details, refer to Time Range List below.
Timer mode
Set the timer mode using the
keys.
Function setting mode
(Elapsed (Remaining
time)
time)
ON/OFF
start mode
Set the twin timer output mode using the
keys.
(Flicker OFF (Flicker ON
start)
start)
Time Range List
Display
Input signal
width
Set the input signal width using the
(20 ms)
keys.
Set Value
0.01 s to 99.99 s (default setting)
0.1 s to 999.9 s
(1 ms)
1 s to 9999 s
NPN/PNP
input mode
Set the NPN/PNP input mode using the
keys.
(NPN input) (PNP input)
Only displayed for H5CX-A@ and H5CX-A11@ models.
0 min 01 s to 99 min 59 s
0.1 min to 999.9 min
1 min to 9999 min
Display color
Set the display color using the
keys.
0 h 01 min to 99 h 59 min
(Red) (Green) (Red-green) (Green-red)
Displayed for terminal-block models (H5CX-A@) only.
Key protect
level
Set the key protect level using the
(KP-1)
(KP-2)
(KP-3)
keys.
(KP-4)
(KP-5)
0.1 h to 999.9 h
1 h to 9999 h
0.001 s to 9.999 s
27
H5CX-A/-L
Explanation of Functions
OFF Time Range (oftr) (Setting possible using DIP
switch.)
Input Signal Width (iflt) (Setting possible using DIP
switch.)
Set the time range for the OFF time in the range 0.000 s to 9,999 h.
Only settings of type --.-- s (99.99 s), ---.- s (999.9 s), ---- s (9,999 s),
and -- min -- s (99 min 59 s), however, can be made with the DIP
switch. Use the operation keys if another type of setting is required.
Set the minimum signal input width (20 ms or 1 ms) for signal, reset,
and gate inputs. The same setting is used for all external inputs (signal, reset, and gate inputs). If contacts are used for the input signal,
set the input signal width to 20 ms. Processing to eliminate chattering is performed for this setting.
ON Time Range (ontr) (Setting possible using DIP
switch.)
NPN/PNP Input Mode (imod)
Set the time range for the ON time in the range 0.001 s to 9,999 h.
Only settings of type --.-- s (99.99 s), ---.- s (999.9 s), ---- s (9,999 s),
and -- min -- s (99 min 59 s), however, can be made with the DIP
switch. Use the operation keys if another type of setting is required.
Select either NPN input (no-voltage input) or PNP input (voltage
input) as the input format. The same setting is used for all external
inputs. For details on input connections, refer to Input Connections
on page 9.
Timer Mode (timm) (Setting possible using DIP switch.)
Display Color (colr)
Set either UP (incremental) or DOWN (decremental) timer mode. In
UP mode, the elapsed time is displayed, and in DOWN mode, the
remaining time is displayed.
Set the color used for the present value.
ON/OFF Start Mode (totm) (Setting possible using DIP
switch.)
red
Red (fixed)
grn
Green (fixed)
r-g
Red
Green
g-r
Green
Red
Output OFF
Set the output mode. Set either flicker OFF start or flicker ON start.
(For details on output mode operation, refer to Timing Charts on
page 30.)
Output ON
Key Protect Level (kypt)
Set the key protect level.
When the key-protect switch is set to ON, it is possible to prevent setting errors by prohibiting the use of certain operation keys by specifying the
key protect level (KP-1 to KP-5). The key protect indicator is lit while the key-protect switch is set to ON.
(See note)
OFF ON
Note: Factory-set to OFF
Key protect indicator
Level
Meaning
Details
Changing mode
(See note.)
Switching display
during operation
Reset key
Up/down key
KP-1
(default setting)
No
Yes
Yes
Yes
KP-2
No
Yes
No
Yes
KP-3
No
Yes
Yes
No
KP-4
No
Yes
No
No
KP-5
No
No
No
No
Note: Changing mode to timer/twin timer selection mode (
MODE
+
1
1 s min.) or function setting mode (
MODE
3 s min.).
28
H5CX-A/-L
Operation in Run Mode
Present value
Set the digits for the OFF set time using the corresponding
keys.
Set the digits for the ON set time using the corresponding
keys.
OFF set time
Present value
ON set time
Present Value and OFF Set Time
The present value is displayed in the main display and the OFF set
time is displayed in the sub-display. “SET1” lights at the same time.
Present Value and ON Set Time
The present value is displayed in the main display and the ON set
time is displayed in the sub-display. “SET2” lights at the same time.
29
H5CX-A/-L
Timing Charts
Twin Timer Operation
The gate input is not included in the H5CX-L8@ models.
Output mode toff: Flicker OFF start
Sustained
Output
Timing starts when the start signal goes ON.
The status of the control output is reversed when time
is up (OFF at start).
While the start signal is ON, the timer starts when the
power comes ON or when the reset input goes OFF.
Power
Start signal
Basic Operation
Gate
Power
Reset
Start signal **
input
Control output
OFF time
Timing
ON
Timing
OFF
Timing
ON
Output
UP
ON time
Timing
diagram
Timing
OFF
*
Normal output operation will not be possible if the
ON/OFF set time is too short.
Set the value to at least 100 ms (contact output
type).
** Start signal input is disabled during timing.
0
OFF time
DOWN
ON time
0
Output mode ton: Flicker ON start
Sustained
Output
Timing starts when the start signal goes ON.
The status of the control output is reversed when time
is up (ON at start).
While the start signal is ON, the timer starts when the
power comes ON or when the reset input goes OFF.
Power
Start signal
Basic Operation
Gate
Power
Reset
Start signal **
input
Control output
OFF time
Timing
ON
Timing
OFF
Timing
ON
Timing
OFF
Output
UP
Timing
diagram
ON time
*
Normal output operation will not be possible if the
ON/OFF set time is too short.
Set the value to at least 100 ms (contact output
type).
** Start signal input is disabled during timing.
0
OFF time
DOWN
ON time
0
Self-diagnostic Function
The following displays will appear if an error occurs.
Main display
Sub-display
e1
Not lit
e2
e2
Error
Output status
Correction method
Set value after
reset
CPU
OFF
Either press the reset key or reset the No change
power supply.
Not lit
Memory error (RAM)
OFF
Reset the power supply.
No change
sum
Memory error (EEP)
(See note)
OFF
Reset to the factory settings using
the reset key.
0
Note: This includes times when the life of the EEPROM has expired.
30
H5CX-A/-L
■ Operation in Timer/Twin Timer Selection Mode
Select whether the H5CX is used as a timer or a twin timer in timer/twin timer selection mode. The H5CX is also equipped with a DIP switch monitor
function, a convenient function that enables the settings of the DIP switch pins to be confirmed using the front display.
Power ON
Run Mode
1
To change the mode to timer/twin timer selection mode, hold
1 key for 1 s min. with the MODE key held down.
down the
The MODE key must be pressed before the
1 key.
If the
1 key is pressed first, the mode will not change.
+
Timer/Twin Timer Selection Mode
1
1 s min.
Timer/Twin
timer selection
Select either timer operation or twin timer operation
using the
keys.
(Timer)
(Twin timer)
Note: The H5CX is factory-set for timer operation.
DIP switch
monitor
Confirm the status of DIP switch pins 1 to 8 using
the
keys.
Note 1. This display is not supported with H5CX-L8@.
2. This display is only possible when DIP switch pin 1
(DIP switch settings enable/disable) is set to ON
(enable).
Example
1
2
3
4
5
6
7
8
ON
OFF
Indicates that DIP switch pin 8 is ON.
Indicates that DIP switch pin 7 is OFF.
Indicates that DIP switch pin 6 is ON.
Indicates that DIP switch pin 5 is OFF.
Indicates that DIP switch pin 4 is ON.
Indicates that DIP switch pin 3 is OFF.
Indicates that DIP switch pin 2 is ON.
Indicates that DIP switch pin 1 is ON.
Note 1. When the mode is changed to timer/twin timer selection mode, the present value is reset and output turns OFF. Timing operation is not
performed in timer/twin timer selection mode.
2. Setting changes made in timer/twin timer selection mode are enabled when the mode is changed to run mode. If settings are changed, the
HC5X is automatically reset (present value initialized, output turned OFF).
31
H5CX-A/-L
Additional Information
■ Using the Operation Keys
Timer Operation
Operation stopped
Power ON
Can be in operation
1
+
1 s min.
3 s min.
Timer/twin timer selection mode
Run mode
1
+
1 s min.
Timer (Except for Z mode)
Function setting mode
3 s min.
Time range
Timer/twin timer selection
PV/SV
DIP switch monitor
Timer mode
Timer (Z mode)
Output mode
PV/ON duty ratio
Output time
PV/cycle time
Input signal width
NPN/PNP input mode
Display color
Key protect level
Twin Timer Operation
Operation stopped
Power ON
+
1
3 s min.
1 s min.
Timer/twin timer selection mode
Run mode
+
DIP switch monitor
Function setting mode
1
3 s min.
1 s min.
Timer/twin timer selection
Can be in operation
PV/OFF set time
OFF time range
PV/ON set time
ON time range
Timer mode
Twin timer output mode
Input signal width
NPN/PNP input mode
Display color
Key protect level
Note 1. All setting changes are performed using the
and
keys.
2. The above flowcharts outline the procedure for all models. For details on specific models, refer to page 19 (timer operation) or page 27
(twin timer operation).
32
H5CX-A/-L
■ List of Settings
Fill in your set values in the set value column of the following tables and utilize the tables for quick reference.
Timer/Twin Timer Selection Mode
Parameter
name
Parameter
Setting range
Default value
Unit
Timer/Twin Tim- func
er selection
tim/twin
tim
---
DIP switch moni- dip
tor
on/off
off
---
Set value
Settings for Timer Operation
Run Mode when Output Mode Is Not Z
Parameter name
Present value,
set value
Parameter
Set value
Setting range
---
Present value
Default value
Unit
0.00 to 99.99 (Time range: --,--s)
0.00
s
---
0.0 to 999.9 (Time range: ---,-s)
0.0
s
---
0 to 9999 (Time range: ----s)
0
s
---
0:00 to 99:59 (Time range: --min--s)
0:00
min; s
---
0.0 to 999.9 (Time range: ---,-min)
0.0
min
---
0 to 9999 (Time range: ----min)
0
min
---
0:00 to 99:59 (Time range: --h--min)
0:00
h; min
---
0.0 to 999.9 (Time range: ---,-h)
0.0
h
---
0 to 9999 (Time range: ----h)
0
h
---
0.000 to 9.999 (Time range: -,---s)
0.000
s
---
Same as set value
Same as left
Same as left
Set value
Run Mode when Output Mode = Z
Parameter name
Present value,
ON duty ratio
Present value,
cycle time
Cycle time
Parameter
Setting range
Default value
Unit
---
0.00 to 99.99 (Time range: --,--s)
0.00
s
---
0.0 to 999.9 (Time range: ---,-s)
0.0
s
---
0 to 9999 (Time range: ----s)
0
s
---
0:00 to 99:59 (Time range: --min--s)
0:00
min; s
---
0.0 to 999.9 (Time range: ---,-min)
0.0
min
---
0 to 9999 (Time range: ----min)
0
min
---
0:00 to 99:59 (Time range: --h--min)
0:00
h; min
---
0.0 to 999.9 (Time range: ---,-h)
0.0
h
---
0 to 9999 (Time range: ----h)
0
h
---
0.000 to 9.999 (Time range: -,---s)
0.000
s
ON duty ratio
---
0 to 100
0
%
Present value
---
Same as cycle time above
Same as left
Same as left
Present value
---
Same as cycle time above
Same as left
Same as left
Set value
Function Setting Mode
Parameter name
Parameter
Setting range
Default
value
Unit
Time range
timr
--.--s/---.-s/----s/--min--s/---.-min/----min/-h--min/---.-h/----h/-.---s
--.--s
Timer mode
timm
up/down
up
---
Output mode
outm
a/a-1/a-2/a-3/b/b-1/d/e/f/=
a
---
Output time
otim
hold/0.01 to 99.99
hold
s
Input signal width
iflt
20ms/1ms
20ms
---
NPN/PNP input mode
imod
npn/pnp
npn
---
Display color
colr
red/org/r-o/o-r
red
---
Key protect level
kypt
kp-1/kp-2/kp-3/kp-4/kp-5
kp-1
---
Set value
---
33
H5CX-A/-L
Settings for Twin Timer Operation
Run Mode
Parameter name
Present value,
OFF set time
Present value,
ON set time
OFF set time
Parameter
Setting range
Default value
Unit
---
0.00 to 99.99 (Time range: --,--s)
---
0.0 to 999.9 (Time range: ---,-s)
0.0
s
---
0 to 9999 (Time range: ----s)
0
s
---
0:00 to 99:59 (Time range: --min--s)
0:00
min; s
---
0.0 to 999.9 (Time range: ---,-min)
0.0
min
---
0 to 9999 (Time range: ----min)
0
min
---
0:00 to 99:59 (Time range: --h--min)
0:00
h; min
---
0.0 to 999.9 (Time range: ---,-h)
0.0
h
---
0 to 9999 (Time range: ----h)
0
h
s
Set value
s
0.00
---
0.000 to 9.999 (Time range: -,---s)
0.000
Present value
---
Same as OFF set time above
Same as left
Same as left
ON set time
---
Same as OFF set time above
Same as left
Same as left
Present value
---
Same as OFF set time above
Same as left
Same as left
Function Setting Mode
Parameter name
Parameter
Setting range
Default
value
Unit
OFF time range
oftr
--.--s/---.-s/----s/--min--s/---.-min/----min/
--h--min/---.-h/----h/-.---s
--.--s
---
ON time range
ontr
--.--s/---.-s/----s/--min--s/---.-min/----min/
--h--min/---.-h/----h/-.---s
--.--s
---
Timer mode
timm
up/down
up
---
ON/OFF start mode
totm
toff/ton
toff
---
Input signal width
iflt
20ms/1ms
20ms
---
NPN/PNP input mode
imod
npn/pnp
npn
---
Display color
colr
red/grn/r-g/g-r
red
---
Key protect level
kypt
kp-1/kp-2/kp-3/kp-4/kp-5
kp-1
---
Set value
34
2-stage Digital Timer
H5CX-B
DIN 48 × 48-mm Digital Timer with 6-digit
Display and Forecast Output
• Times the daily operating hours of machinery and tools, predicting and notifying when maintenance is required.
• The 2-stage settings and forecast output are ideal for maintenance applications.
• All settings can be performed easily with a DIP switch.
• PNP/NPN switchable DC-voltage input.
Contents
Model Number Structure ............................................................. 36
Ordering Information.................................................................... 36
Specifications .............................................................................. 37
Connections................................................................................. 39
Nomenclature .............................................................................. 42
Dimensions.................................................................................. 43
Operating Procedures ................................................................. 44
35
H5CX-B
Model Number Structure
■ Model Number Legend
H5CX-BWSD
1 2 3 4
1. Type classifier
B:
6-digit display type
2. Stage setting
W:
2-stage setting
3. Output type
S:
Transistor output
4. Supply voltage
D:
12 to 24 VDC
Ordering Information
■ List of Models
Output type
Supply voltage
6-digit display
Screw terminals
Transistor
12 to 24 VDC
H5CX-BWSD
■ Accessories (Order Separately)
Name
Flush Mounting Adapter (See note.)
Models
Y92F-30
Waterproof Packing (See note.)
Y92S-29
Hard Cover
Y92A-48
Soft Cover
Y92A-48F1
Note: Supplied with H5CX-BWSD.
36
H5CX-B
Specifications
■ Ratings
Item
H5CX-BWSD
Classification
Digital timer
Rated supply voltage
12 to 24 VDC (permissible ripple: 20% (p-p) max.)
Operating voltage range
90% to 110% rated supply voltage
Power consumption
(See note 1.)
Approx. 2.3 W at 12 VDC
Mounting method
Flush mounting
External connections
Screw terminals
Terminal screw tightening
torque
0.5 N·m max.
Display (See note 2.)
7-segment, negative transmissive LCD;
Present value: 9-mm-high characters, red
Set value: 6-mm-high characters, green
Digits
6 digits
Time ranges
9999.99 s (0.01-s unit), 99 h 59 min 59 s (1-s unit), 99999.9 min (0.1-min unit), 99999.9 h (0.1-h unit)
Timer mode
Elapsed time (Up)
Input signals
Signal, reset, gate
Input method
No-voltage input/voltage input (switchable)
No-voltage Input
ON impedance: 1 kΩ max. (Leakage current: 5 to 20 mA when 0 Ω)
ON residual voltage: 3 V max.
OFF impedance: 100 kΩ min.
Voltage Input
High (logic) level: 4.5 to 30 VDC
Low (logic) level: 0 to 2 VDC
(Input resistance: approx. 4.7 kΩ)
Signal, reset, gate
Minimum input signal width: 1 or 20 ms (selectable, same for all input)
Reset system
Power resets (only for A mode), external and manual reset
Power reset
Minimum power-opening time: 0.5 s (except for F-1 mode)
Reset voltage
10% max. of rated supply voltage
Sensor waiting time
250 ms max. (Control output is turned OFF and no input is accepted during sensor waiting time.)
Output modes
A, F-1
Control output
Transistor output: NPN open collector, 100 mA at 30 VDC max.
residual voltage: 1.5 VDC max. (Approx. 1 V)
Leakage current: 0.1 mA max.
Output category according to EN60947-5-2 (DC-13; 30 V 100 mA)
Key protection
Yes
Memory backup
EEPROM (overwrites: 100,000 times min.) that can store data for 10 years min.
Ambient temperature
Operating:
Storage:
Ambient humidity
25% to 85%
−10 to 55°C (−10 to 50°C if timers are mounted side by side) (with no icing or condensation)
−25 to 65°C (with no icing or condensation)
Case color
Black (N1.5)
Attachments
Waterproof packing, flush mounting adapter, unit label
Note 1. Inrush current will flow for a short time when the power supply is turned ON. Refer to Inrush Current (Reference Values) on page 38.
2. The display is lit only when the power is ON.
37
H5CX-B
■ Characteristics
Item
H5CX-BWSD
Accuracy of operating time Power-ON start: ±0.02% ±0.05 s max. Rated against set value
and setting error (including Signal start (minimum pulse width of 20 ms): ±0.01% ±0.03 s max. Rated against set value
temperature and voltage inSignal start (minimum pulse width of 1 ms): ±0.01% ±3 ms max.
fluences) (See note 1.)
If the set value is within the sensor waiting time at startup the control output of the H5CX will not turn ON until the
sensor waiting time passes.
Insulation resistance
100 MΩ min. (at 500 VDC) between current-carrying terminal and exposed non-current-carrying metal parts
Dielectric strength
2,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and non-current-carrying metal parts
1,000 VAC, 50/60 Hz for 1 min between control output, power supply, and input circuit
Impulse withstand voltage
1.0 kV (between power terminals)
1.5 kV (between current-carrying terminal and exposed non-current-carrying metal parts)
Noise immunity
±480 V (between power terminals) and ±600 V (between input terminals), square-wave noise by noise simulator
(pulse width: 100 ns/1 µs, 1-ns rise)
Static immunity
Destruction: 15 kV
Malfunction: 8 kV
Vibration resistance
Destruction: 10 to 55 Hz with 0.75-mm single amplitude each in three directions, 2 hours each
Malfunction: 10 to 55 Hz with 0.35-mm single amplitude each in three directions, 10 min each
Shock resistance
Destruction: 294 m/s2 each in three directions
Malfunction: 196 m/s2 each in three directions
Approved safety
standards (See note 2.)
UL508/Listing, UL50 Type 4X for indoor use (enclosure rating), CSA C22.2 No. 14, conforms to EN61812-1 (Pollution
degree 2/overvoltage category III)
Conforms to VDE0106/P100 (finger protection).
EMC
(EMI)
Emission Enclosure:
(EMS)
Immunity ESD:
Immunity RF-interference:
EN61812-1
EN55011 Group 1 class A
EN61812-1
EN61000-4-2:
6 kV contact discharge (level 2)
8 kV air discharge (level 3)
EN61000-4-3:
10 V/m (Amplitude-modulated, 80 MHz to 1 GHz) (level 3);
10 V/m (Pulse-modulated, 900 MHz ±5 MHz) (level 3)
Immunity Conducted
Disturbance:
Immunity Burst:
EN61000-4-6:
EN61000-4-4:
Immunity Surge:
EN61000-4-5:
10 V (0.15 to 80 MHz) (level 3)
2 kV power-line (level 3);
1 kV I/O signal-line (level 4)
1 kV line to lines (power and output lines) (level 3);
2 kV line to ground (power and output lines) (level 3)
Degree of protection
Panel surface: IP66 and NEMA4 (indoors), and UL Type 4X (indoors) (See note 2.)
Weight
Approx. 140 g
Note 1. The values are based on the set value.
2. The Y92S-29 Waterproof Packing and Y92F-30 Flush Mounting Adapter are necessary to ensure IP66, NEMA4, and UL Type 4X waterproofing between the H5CX and installation panel.
■ Inrush Current (Reference Values)
Voltage
Applied voltage
12 to 24 VDC 26.4 VDC
Inrush current
(peak value)
6A
Time
1.2 ms
38
H5CX-B
Connections
■ Block Diagram
Power supply
circuit
Output circuit
(Basic insulation)
Display circuit
Internal control
circuit
Input circuit
Key switch
circuit
■ I/O Functions
Inputs
Start signal
Starts timing.
Reset
Resets present value. (The present value returns to 0.)
Timing stops and control output turns OFF while reset input is ON.
Reset indicator is lit while reset input is ON.
Gate
Outputs
Forecast value
setting
Absolute value
setting
Inhibits timer operation.
Control output
(OUT2)
Turns ON when the present value reaches the set value.
Forecast output
(OUT1)
Turns ON when the present value reaches the forecast value.
The forecast value = set value − forecast set value
Control output 2
(OUT2)
Turns ON when the present value reaches set value 2.
Control output 1
(OUT1)
Turns ON when the present value reaches set value 1.
39
H5CX-B
Reset
Signal
Gate
Reset
■ Terminal Arrangement
7
8
9
10
Input use 0 V
6
Unused
11
1
12
2
3
13
4
OUT1
5
OUT2
(−)
(+)
Note 1. Do not connect unused terminals as relay terminals.
2. The power supply and input circuit are not isolated.
3. Terminals 1 and 6 are connected internally.
4. Terminals 7 and 10 have the same reset function. The same function will be performed whichever terminal is connected. Terminals 7 and
10 are not connected internally, however, so do not use them for cross-over wiring.
5. Recommended lead wires: AWG18 to AWG24 (cross-sectional area: 0.205 to 0.823 mm2), single line or twisted-pair cable, made of copper
or aluminum.
■ Input Circuits
Signal, Reset, and Gate Input
No-voltage Input (NPN Inputs)
Voltage Inputs (PNP Inputs)
Approx. 4.7 kΩ
+14 V
IN
1 kΩ
IN
Internal
circuit
Internal
circuit
40
H5CX-B
■ Input Connections
The inputs of the H5CX-B are no-voltage (short-circuit or open) inputs or voltage inputs.
No-voltage Inputs (NPN Inputs)
Contact Input
Open Collector
Voltage Output
(Connection to NPN open
collector output sensor)
(Connection to a voltage output
sensor)
PLC or sensor
DC Two-wire Sensor
Operate with transistor ON
Operate with transistor ON
Operate with relay ON
Reset input
Gate input
Signal input
Input
0V
Reset input
Gate input
Reset input
Reset input
Signal input
0V
Input
Gate input
Reset input
Signal input
Input
0V
Reset input
Gate input
Reset input
Signal input
Input
0V
Reset input
Sensor
Operate with transistor ON
Applicable Two-wire Sensor
Leakage current:
Switching capacity:
Residual voltage:
Operating voltage:
1.5 mA max.
5 mA min.
3.0 VDC max.
10 VDC
No-voltage Input Signal Levels
No-contact input
Short-circuit level
Transistor ON
Residual voltage: 3 V max.
Impedance when ON: 1 kΩ max.
(the leakage current is about 12 mA when the
impedance is 0 Ω)
Open level
Transistor OFF
Impedance when OFF: 100 kΩ min.
Contact input
Use contact which can adequately switch
5 mA at 10 V
Note: The DC voltage must be 30 VDC max.
Voltage Inputs (PNP Inputs)
No-contact Input
(NPN Transistor)
No-contact Input
(PNP Transistor)
(Connection to NPN open
collector output sensor)
(Connection to PNP open
collector output sensor)
Contact Input
Operate with transistor ON
Operate with transistor OFF
Reset input
Gate input
Reset input
Signal input
0V
Input
Reset input
Gate input
Input
Reset input
0V
Reset input
Gate input
Signal input
Input
Reset input
0V
Signal input
Sensor
Sensor
Operate with relay ON
Voltage Input Signal Levels
High level (Input ON):
Low level (Input OFF):
Input resistance:
4.5 to 30 VDC
0 to 2 VDC
Approx. 4.7 kΩ
Note: The DC voltage must be 30 VDC max.
41
H5CX-B
Nomenclature
Operation Key
Indicator
Reset Indicator (orange)
Lit when the reset input or Reset Key
is ON.
Key Protection Indicator (orange)
Lit when the Key-protect Switch is
ON.
Control Output Indicator (orange)
Forecast value setting:
Forecast output ON: 1 is lit
Control output ON: 2 is lit
Absolute value setting:
Control output 1 ON: 1 is lit
Control output 2 ON: 2 is lit
Mode Key
(Changes setting items)
Reset Key
(Resets present value and output)
Up Keys 1 to 6
Sixth digit
First digit
Front View
Present Value (red)
Character height: 9 mm
If the time range is 0.0 min or 0.0 h,
the decimal point flashes to indicate
timing operation.
Set Value (green)
Character height: 6 mm
Switches
Key-protect Switch
When the Key-protect Switch is ON, key
operations are prohibited according to the
settings for DIP switch pins 6 to 8, thus
preventing setting errors. The Key-protect
Switch can be turned ON and OFF while
the power is ON. The Key Protection
Indicator is lit orange when the
Key-protect Switch is ON.
(Default setting) OFF
ON
Set Value 1, 2 Display (green)
DIP Switch
Refer to DIP Switch Settings on
page 45 for details on setting the
DIP switch.
1
2
3
4
5
6
7
8
ON
OFF
(Default setting)
■ Unit Label
The unit label is included with the Unit. Affix the unit label in the position shown in the following diagram to match the time range to be
used.
Align the right edge of the label with the
right edge of the display window.
Unit label
42
H5CX-B
Dimensions
Note: All units are in millimeters unless otherwise indicated.
■ Dimensions without Flush Mounting Adapter
H5CX-BWSD (Flush Mounting Models)
Panel Cutouts
6
48x48
Panel cutouts areas
shown below.
(according to DIN43700).
64
60 min.
44.8x44.8
45 +0.6
−0
45 +0.6
−0
Note:
M3.5 terminal screw (effective length: 6 mm)
60 min. 15 min.
■ Dimensions with Flush Mounting Adapter
H5CX-BWSD (Provided with Adapter and Waterproof Packing)
Y92S-29 (provided)
Waterproof Packing
58
Panel
Y92F-30 (provided)
Flush Mounting Adapter
Note 1. The mounting panel thickness
should be 1 to 5 mm.
2. To allow easier operability, it is
recommended that Adapters are
mounted so that the gap between
sides with hooks is at least 15 mm.
3. It is possible to mount timers side
by side, but only in the direction
without the hooks.
(51)
n side by side mounting
48
7.5
62.5
A
A = (48n − 2.5) +1
0
With Y92A-48F1 attached.
A = {48n−2.5 + (n−1) x 4} +1
0
With Y92A-48 attached.
A = (51n−5.5) +1
0
■ Accessories (Order Separately)
Hard Cover
Y92A-48
Soft Cover
Y92A-48F1
Note: 1. Depending on the operating environment, the condition of
resin products may deteriorate, and may shrink or become
harder. Therefore, it is recommended that resin products
are replaced regularly.
2. The H5CX’s panel surface is water-resistive (conforming to
IP66) and so even if drops of water penetrate the gaps between the keys, there will be no adverse effect on internal
circuits. If, however, there is a possibility of oil being present
on the operator’s hands, use the Soft Cover. The Soft Cover
ensures protection equivalent to IP54F against oil. Do not,
however, use the H5CX in locations where it would come in
direct contact with oil.
Flush Mounting Adapter
(provided with H5CX-BWSD)
Y92F-30
Waterproof Packing
(provided with H5CX-BWSD)
Y92S-29
Note: Order the Flush Mounting Adapter separately if it is lost or damaged.
Note: Use Waterproof Packing to provide a level of water protection
that complies with NEMA4, UL Type 4X, or IP66 standards. Order the Waterproof Packing separately if it is lost or damaged.
Depending on the operating environment, the Waterproof
Packing may deteriorate, contract, or harden and so regular replacement is recommended.
43
H5CX-B
Operating Procedures
■ Setting Set Values
Set values can be set either as offset values (forecast value setting)
or absolute values. Set values are factory-set to forecast value setting.
Forecast Value Setting
Example: F-1 Mode
Present value
Turn ON the power while
pressing the
Key and
4 Key.
Set value
Timing stopped
Timing possible
Forecast
set value
Forecast value
0
Setting Method
Selection Mode
Change the setting method
using
Keys 1 to 6.
Forecast output (OUT1)
Control output (OUT 2)
(Forecast value setting) (Absolute value setting)
Turn ON the power again.
Run Mode
1. Move to Setting Method Selection Mode by turning ON the power
while pressing both the
Key and
4 Key at the same time.
2. Select forecast value setting (
) or absolute value setting
(
) using the
Keys.
3. When the power is turned ON again, the Timer will start with the
selected setting method.
Note 1: In Setting Method Selection Mode, outputs are OFF and the
timer is stopped.
2: When the setting method is changed, the set values and
present value are reset to 0, and outputs are OFF.
• OUT1 (forecast output) turns ON when the present value reaches
the forecast value.
The forecast value = set value − forecast set value
The forecast set value is used to set the deviation for the set value.
• OUT2 (control output) turns ON when the present value reaches
the set value.
• If the forecast set value ≥ set value, OUT1 (forecast output) will turn
ON as soon as timing starts.
Absolute Value Setting
Example: F-1 Mode
Present value
Set value 2
Set value 1
0
Control output 1 (OUT1)
Control output 2 (OUT 2)
• OUT1 (control output 1) turns ON when the present value reaches
set value 1.
• OUT2 (control output 2) turns ON when the present value reaches
set value 2.
44
H5CX-B
■ DIP Switch Settings
All functions are set using the DIP switch.
Item
1
OFF
ON
Time range
Refer to the table on the right.
3
Output mode
F-1 mode
A mode
4
Input signal width
20 ms
1 ms
5
NPN/PNP input
mode
NPN
PNP
6
Reset Key protection
Disabled
Enabled
7
Up Key protection
Disabled
Enabled
8
Mode Key protection
Disabled
Enabled
Pin 1
2
Pin 2
Time range
OFF
OFF
0.1 h to 99999.9 h
ON
OFF
0.01 s to 9999.99 s
OFF
ON
0 h 00 min 01 s to 99 h 59 min 59 s
ON
ON
0.1 min to 99999.9 min
1
2
3
4
5
6
7
8
ON
OFF
(Default setting)
Note 1: All the pins are factory-set to OFF.
2: DIP switch settings are effective when the power is turned
ON again. (Set the DIP switch before installation and powerup.)
3: The characters displayed in reverse video are the default settings.
■ Operation in Run Mode
Set each digit for the set value using the corresponding
Keys.
Forecast Value Setting
Present value
Set value
Present value
Each time the
Key is
pressed, the sub-display will
switch between the set
value (“SET” is lit) and the
forecast set value (“1” is lit).
Forecast set value
Absolute Value Setting
Present value
Set value 1
Present value
Each time the
Key is
pressed, the sub-display
will switch between set
value 1 (“SET 1” is lit) and
set value 2 (“SET 2” is lit).
Set value 2
45
H5CX-B
■ Timing Charts
A Mode: Signal ON delay (Timer resets when power comes ON.)
• Timing starts when the start signal turns ON.
• While the start signal is ON, the timer starts when the power
turns ON or when the reset input turns OFF.
• A sustained control output is used.
• Timing stops when the time is up.
Power
Start signal
Gate
Basic Operation
Timing diagram
Reset
Power
999999
Set value (SV 2)
Forecast value (SV 1)
0
Start signal input**
Timing
Forecast output
(Control output 1)
OUT1
Control output
(Control output 2)
OUT2
OUT1
OUT2
The names in parentheses are used for the
absolute value setting.
The names in parentheses are used for the absolute value setting.
* Output is instantaneous when the set value is 0.
** Start signal input is disabled during timing.
F-1 mode: Cumulative (Timer does not reset when power comes ON.)
• Start signal enables timing (timing is stopped when the
start signal is OFF or when the power is OFF).
• A sustained control output is used.
• Timing continues even after the time is up.
Power
Start signal
Basic Operation
Gate
Power
Timing diagram
Reset
999999
Set value (SV 2)
Start signal input
Forecast value (SV 1)
Forecast output
(Control output 1)
OUT1
Control output
(Control output 2)
OUT2
0
OUT1
OUT2
The names in parentheses are used for the absolute value setting.
*
Timing
Timing Sustained
The names in parentheses are used for
the absolute value setting.
Output is instantaneous when the set value is 0.
Note: Forecast Value = Set Value − Forecast Set Value
The forecast set value is used to set the deviation for the set value.
■ Self-diagnostic Function
The following displays will appear if an error occurs.
Main display
Sub-display
e1
Not lit
e2
e2
Error
Output status
Correction method
Set value after
reset
CPU
OFF
Either press the reset key or reset the No change
power supply.
Not lit
Memory error (RAM)
OFF
Reset the power supply.
No change
sum
Memory error (EEP)
(See note)
OFF
Reset to the factory settings using
the reset key.
0
Note: This includes times when the life of the EEPROM has expired.
46
H5CX-B
Safety Precautions (Common)
Refer to Safety Precautions for All Timers.
Note: The following precautions are common for all H5CX models.
CAUTION
Loose screws may occasionally result in fire or malfunction. Tighten
the terminal screws securely. The recommended tightening torque
is 0.5 N·m.
There may occasionally be a risk of explosion. Do not use the
product where flammable or combustion gases are present.
This may occasionally cause electric shock, fire or malfunction.
Never disassemble, repair or modify the product.
X2/b
T
T/a
X1/a
X1
X2
■ Precautions for Safe Use
The following precautions must be observed to ensure safety.
Operating and Storage Conditions
• Do not use in locations affected by excessive vibration or shock, or
in locations subject to exposure to water or oil.
• Do not use the product in locations subject to dust, corrosive
gases, or direct sunlight.
• Separate the input signal devices, input signal cables, and the
product from the source of noise or high-tension cables producing
noise.
• Separate the product from the source of static electricity when
using the product in an environment where a large amount of static
electricity is produced (e.g., forming compounds, powders, or fluid
materials being transported by pipe).
• Organic solvents (such as paint thinner), as well as very acidic or
basic solutions might damage the outer casing of the H5CX.
• Use the product within the ratings specified for temperature and
humidity.
• Do not use the product in locations where condensation may occur
due to high humidity or where temperature changes are severe.
• Store at the specified temperature. If the H5CX has been stored at
a temperature of less than –10°C, allow the H5CX to stand at room
temperature for at least 3 hours before use.
X
Auxiliary relay
(e.g., MY Relay)
• When the product is operated with no-voltage input (NPN input),
approximately 14 V is output from the input terminals, so connect a
diode if the external power supply is less than 14 V.
This may occasionally cause electric shock, fire or malfunction.
Do not allow metal fragments or lead wire scraps to fall inside this
product.
If both the power supply for the input device and that for the timer
are not insulated, unwanted current from the AC power supply
may occasionally burn out or damage the internal parts. Always
use an insulated power supply for the timer.
X1/a
Sensor
0V
Input
• Install a switch or circuit-breaker that allows the operator to
immediately turn OFF the power, and make sure it is labeled
clearly.
• The H5CX’s panel surface is water-resistive (conforming to NEMA
4, UL Type 4X, and IP66). In order to prevent the internal circuit
from water penetration through the space between the H5CX and
operating panel, attach a waterproof packing (Y92S-29) between
the H5CX and installation panel and secure the waterproof packing
with the Y92F-30 Flush-mounting Adapter.
0.5 to 1 mm
It is recommended that the space between
the screw head and the adapter should be
0.5 to 1 mm.
• Tighten the two mounting screws on the Adapter. Tighten them
alternately, a little at a time, so as to keep them at an equal
tightness. If the panel screws are tightened unequally, water may
ingress inside the panel.
Usage Precautions
• Make sure that the voltage applied is within the specified range,
otherwise the internal elements of the counter may be damaged.
• The load current must be within the rated current.
• Ensure that the power is turned OFF before changing DIP switch
settings. Changing DIP switch settings with the power turned ON
may result in electric shock due to contact with terminals subject to
high voltages.
• Pay attention to terminal polarity to ensure correct wiring.
• Make sure that the fluctuation of the supply voltage is within the
permissible range.
• Apply the power supply voltage through a relay or switch in such a
way that the voltage reaches the rated value within 2 s. If the
voltage is applied gradually, the power may not be reset or unstable
output operations may result.
• Leaving the H5CX with outputs ON at a high temperature for a long
time may hasten the degradation of internal parts (such as
electrolytic capacitors). Therefore, use the product in combination
with relays and avoid leaving the product as long as more than 1
month with the output turned ON.
47
H5CX-B
■ Precautions for Correct Use
Power Supplies
Turn the power ON and OFF using a relay with a rated capacity of 10
A minimum to prevent contact deterioration due to inrush current
caused by turning the power ON and OFF.
Be sure that the capacity of the power supply is large enough,
otherwise the Timer may not start due to inrush current that may flow
for an instant when the Timer is turned on.
When turning the power ON and OFF, input signal reception is
possible, unstable, or impossible as shown in the diagram below.
Power
supply
ON
OFF
200 ms 0 to 50 ms
5 ms
0 to 500 ms
Response Delay Time When Resetting
(Transistor Output)
The following table shows the delay from when the reset signal is
input until the output is turned OFF.
(Reference value)
Minimum reset signal width
0.8 to 1.2 ms
20 ms
15 to 25 ms
Power Failure Backup
All data is stored in the EEPROM when there is a power failure. The
EEPROM can be overwritten more than 100,000 times.
Operating mode
Input
Impossible
Possible
Unstable Impossible
Unstable
To allow for the startup time of peripheral devices (sensors, etc.), the
H5CX starts timing operation between 200 ms to 250 ms after power
is turned ON. For this reason, in operations where timing starts from
power ON, the time display will actually start from 250 ms. If the set
value is 249 ms or less, the time until output turns ON will be a fixed
value between 200 and 250. (Normal operation is possible for set
value of 250 ms or more.) In applications where a set value of
249 ms or less is required, use start timing with signal input.
When the H5CX is used with power start in F mode or F-1 mode (i.e.,
accumulative operation with output on hold), there will be a timer
error (approximately 100 ms each time the H5CX is turned ON) due
to the characteristics of the internal circuitry. Use the H5CX with
signal start if timer accuracy is required.
Overwriting timing
A-3, b-1, F, F-1 mode When power is turned OFF.
Other mode
Timer Control with Power Start
Output delay time
1 ms
When settings are changed.
■ Conformance to EN/IEC
Standards
There is no insulation between power supply and input terminals
(except for H5CX-A11/-A11S).
Basic insulation between power supply and output terminals, and
between input terminals and output terminals.
When double insulation or reinforced insulation is required, apply
double insulation or reinforced insulation defined in IEC 60664 that is
suitable for the maximum operating voltage with clearances or solid
insulation.
Transistor Output
The transistor output of the H5CX is insulated from the internal
circuitry by a photocoupler, so the transistor output can be used as
both NPN and PNP output.
NPN Output
PNP Output
Load
Load
+
+
Power for load
Power for load
The diode connected to the collector of the output transistor is used
to absorb inverted voltage that is generated when an inductive load
is connected to the H5CX.
Timer
Inductive load
+
Power for load
48
H5CX-B
Safety Precautions (H5CX-A/-L)
CAUTION
If the output relay is used beyond its life expectancy, its contacts
may occasionally become fused or there may occasionally be a risk
of fire. The life expectancy of the output relay varies considerably
according to its usage. Use the output relay within its rated load and
electrical life expectancy.
Depending on the wiring, unwanted current from the AC power
supply may occasionally burn out (damage) the internal parts.
The H5CX-A/-L (except for H5CX-A11/-A11S) do not have
transformers. Therefore, there is no insulation between the power
supply and input terminals, so make sure that wiring is correct before
use.
For the power supply of an input device of the H5CX (except for
H5CX-A11/-A11S), use an isolating transformer with the primary and
secondary windings mutually isolated and the secondary winding not
grounded.
Correct Wiring Example
H5CX
Usage Precautions
Do not touch the input terminals while power is supplied. The H5CX
(except for H5CX-A11/-A11S) has a transformerless power supply
and so touching the input terminals with power supplied may result in
electric shock.
Changing the Set Values
When changing the set value during a timing operation, the output
will turn ON if the set value is changed as follows because of the use
of a constant read-in system:
Elapsed time (UP) mode: Present value ≥ set value
Remaining time (DOWN) mode: Elapsed time ≥ set value
(The present value is set to 0.)
Note: When in the remaining time mode, the amount the set value is
changed is added to or subtracted from the present value.
Power supply
■ Precautions for Correct Use
Input
terminals
Operation with a Set Value of 0
Rectifier
Circuit
■ Precautions for Safe Use
Isolation transformer is required.
Operation with a set value of 0 will vary with the output mode. Refer
to the Timing Charts.
Incorrect Wiring Example 1
Do not ground the secondary winding. If the secondary wiring is
grounded, as shown in the following diagram, unwanted current may
occasionally burn out or damage the internal parts.
H5CX
Power supply
Circuit
Rectifier
Input
terminals
Incorrect Wiring Example 2
Do not simultaneously input signals from a single input contact or a
transistor to two or more timers that have independent power
supplies. Otherwise, the internal parts may occasionally be burnt out
or damaged by unwanted current, as shown in the following diagram.
H5CX
Power supply
Input
terminals
Input
terminals
49
H5CX-B
Safety Precautions (H5CX-B)
■ Precautions for Safe Use
Changing the Set Value
When changing the set value during a timing operation, the output
will turn ON if the set value is changed as follows because of the use
of a constant read-in system:
Forecast Value Setting
When the present value ≥ the set value, OUT2 (control output) turns
ON. When the present value ≥ the forecast value (forecast value =
set value − forecast set value) OUT1 (forecast output) turns ON.
Absolute Value Setting
When the present value ≥ set value 2, OUT2 (control output 2) turns
ON. When the present value ≥ set value 1, OUT1 (control output 1)
turns ON.
■ Precautions for Correct Use
Operation with a Set Value of 0
When the set value is 0, the output turns ON the moment the signal
is input. The reset operation turns OFF the output.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
50
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2008.11
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2008 All Right Reserved.
